PDA

View Full Version : DRZ 400S chain and sprockets



Parky
21-04-07, 08:23
Has anyone got any recommendations for a chain and sprocket set for a DRZ 400SK3?

I can get an 'O' ring kit locally for 70, I was just wondering whether there were any better deals out there and also whether or not it is worth paying extra for an 'X' ring chain and/or Renthal sprockets?

All advice gratefully received :)

Greg Masters
21-04-07, 19:14
Parky

Are you using the stock 15/44 gearing?

Greg

Parky
22-04-07, 07:08
Parky

Are you using the stock 15/44 gearing?

Greg

Yes, the bike is standard.

Greg Masters
22-04-07, 07:39
Yes, the bike is standard.

You can pick up Renthal or Talon 15 tooth sprockets from about 8; a 44 tooth rear is about 20.

IMHE, rear sprockets last much longer than either the front sprocket or the chain.

A 112-link 520 chain will cost anything from about 9 to 65.

You choose!

Greg

Timpo
22-04-07, 19:28
Parky try M&P.

http://www.mandp.co.uk/

Part numbers:
Front sprocket- JTF432.15
Rear sprocket- JTR808.44

With an o-ring chain, this should be less than 60.

I use two front sprockets to one rear and chain.
Hope this helps.
Timpo.