1200 Alloys on an 1100?

Muppet

Heat Pump Guru

UKGSer Subscriber

Joined

Jul 26, 2003

Messages

1,155

Reaction score

10

Location

Trowbridge, Wilts

• Jul 19, 2005

• #1

Title says it.........does anyone know if 1200 alloys will bolt straight onto my '99 1100 or are the axle/stud sizes etc different. If anyone has easy access to both bikes (or an 1150 I think they're the same as mine) I'd be grateful if you could have a look for me.

Ta

 

Mouse

Registered user

Joined

Jul 5, 2004

Messages

3,786

Reaction score

0

Location

Cowering in a solipsistic funk

• Jul 19, 2005

• #2

The 1200 rear wheel has 5 studs holding it on, and I believe all the older bikes use 4. So the short answer is almost certainly no

Pretty sure the front is different too.

 

Muppet

Heat Pump Guru

UKGSer Subscriber

Joined

Jul 26, 2003

Messages

1,155

Reaction score

10

Location

Trowbridge, Wilts

• Jul 19, 2005

• #3

Bugger

Thanks Mouse.......back to the drawing board then.

 

Number8

Registered user

Joined

Nov 17, 2004

Messages

133

Reaction score

0

Location

Peterborough engerland

• Jul 20, 2005

• #4

Deffo nope

the rear u might be able to fir the 1200 final drive to the 1100 , but i dont know about sizes or anything and looking at my old masn one i dowtit (1200)

and the front has different size disks so u would need new calipers and etc etc etc .. or diff forks or .......

easier to buy a 1200 tbh ....