Does anyone know where I can get the BMW specific 12v power cable for my Zumo? The one that plugs in by the auxiliary socket. Mottorad concepts used to have them, but they seem not to be listed on their site any longer. Thanks in anticipation.
ZUMO POWER CABLE
- Thread starter Gipsy
- Start date
Dutchman
Registered user
We've taken them off our website as the spare Zumo cables are proving very difficult to source.
However we are able to convert customers own Zumo cables with the BMW plug.
Just call us on 0131 663 1012....
Dutch
BurnieM
Guest
It is pretty straight forward to do yourself;
Cut to the right length; check with the unit on the bike first
Remember that the centre pin is positive (red)
Then connect (screw or soldier)
Check that your unit has power then fill the pliug with a neutral cure silicon (keeps water out and provides strain relief)
Cut to the right length; check with the unit on the bike first
Remember that the centre pin is positive (red)
Then connect (screw or soldier)
Check that your unit has power then fill the pliug with a neutral cure silicon (keeps water out and provides strain relief)
The centre wire is a speed sensor feed which you can ignore on the GS.
Similar threads
