Indicators 12v - 6v?

Udders

A Needy Twat

UKGSer Subscriber

Joined

Mar 15, 2009

Messages

10,306

Reaction score

1,381

Location

Outside

• Dec 5, 2010

• #1

Is it as simple as just putting 6v bulbs in ordinary 12v indicators to turn them to 6v? My sons new project (1990 DT 50) didn't come with any indicators on it and we need to get some but I'm wondering is it that simple or will the wire have too much resistance to work properly?

 

rce

Registered user

Joined

Jul 18, 2010

Messages

1,599

Reaction score

0

Location

Sheffield, UK

• Dec 5, 2010

• #2

Assuming it has a flasher unit still then stick 6v bulbs in new indicators and should work

 

Tarka

Registered user

Joined

May 28, 2004

Messages

20,784

Reaction score

7

Location

Wirral

• Dec 5, 2010

• #3

No problem at all fitting 6v bulbs into 12v shells.

It often had to be done the other way around when fitting mini indicators.

As above though,you`ll naturally need to have the original flasher unit or a suitable replacement one.

 

Udders

A Needy Twat

UKGSer Subscriber

Joined

Mar 15, 2009

Messages

10,306

Reaction score

1,381

Location

Outside

• Dec 5, 2010

• #4

Ok, thanks gents. I'll have a look for the flasher unit when we start to strip it down.

 

Timpo

North Wales TRF

UKGSer Subscriber

Joined

Apr 18, 2006

Messages

7,141

Reaction score

1

Location

Cheshire, England.

• Dec 6, 2010

• #5

Udders, I have some indicators here the lad can have FOC...... I'm glad to hear of young lads having a go at rebuilding stuff.
The OP, yes, there is only cables in the shells so a 12v indy can be turned (no pun) into a 6v with a lamp swap.
I'll take some pics of the units I've got and load them on here tonight.
If he needs any other help or advise, just ask....

Timpo.

PS. Got some mirrors here also if required.