fatnfast
Registered user
Sounds logical, I guess the safe bet is to spend some time on a dyno armed with a shorting link then.
Keith Chapman said:For those that have fitted Y pieces have you
Droopy Dick said:
I.E. there are 9 pins, 1-2, 4-6, 7-9 arranged in 3s.
Droopy Dick said:So, looking at the picture that Steptoe supplied, can I be assured that the link is between pins 5 and 6?
I.E. there are 9 pins, 1-2, 4-6, 7-9 arranged in 3s.
Droopy Dick said:So, looking at the picture that Steptoe supplied, can I be assured that the link is between pins 5 and 6?
I.E. there are 9 pins, 1-2, 4-6, 7-9 arranged in 3s.
Steptoe said:it codes the engine for running with a can, and without a cat, its the stage 3 setting for a BB chip, but does the same thing without the chip
gsmoose said:Hi Steptoe,
Is that with the Lambda or without, or doesn't it
matter?
Thanks
Bob James said:WTF cant ya put it in the http://www.ukgser.com/info/wisdom.htm
Section , with info broken down
IE
with cat - race can
Y and race
Y and standard
Y and Legal can
Notes on position ect.
that would be nice.
B-cause i'm head ****** at the mo and cant work it out.
gsmoose said:Many thanks Steptoe,
Can you recommend a setting for no cat, OE can?
HI steptoe, ive got a 2004 gsa 1150 running std exh and cat thingy.just checked your piccy and my cat code plug hole is empty.this is the same as the relay you get, your only paying for the box !
this is plugged in to run a Y piece, and remus .