adler mount block

rovert57 · Feb 10, 2016

hi everyone just received an adler sat nav mount for my gsa was wondering what the thread size is for the nine small holes on the front of the unit .what are the thread size on the garmin zumo mounting bracket thanks in advance for any help with this query .

any photo's of this type of mount would be helpful

rovert57 · Feb 10, 2016

here is a pic of the mount
also which bar does it mount on .

Schtum · Feb 10, 2016

The holes are positioned to accept a Garmin GPS cradle. Did you not get screws and spacers with the ALDER (it was a combination of ALAN and DEREK) mount?

The block should fit the windscreen support bar on an R1200GS Adventure or fit onto ALDER's own GPS mount as in this pic of my 2011 Twin Cam.

rovert57 · Feb 10, 2016

thanks schtum
only got the block thats at the top of your picture so it might fit the one of the bars on my gsa will have to make a bracket to fit my nuvi sat nav

Schtum · Feb 10, 2016

rovert57 said:
thanks schtum
only got the block thats at the top of your picture so it might fit the one of the bars on my gsa will have to make a bracket to fit my nuvi sat nav

Which nüvi have you got? I know there's a RAM cradle for 700 series, i.e. 760 / 770 models that will fit onto the block. Here's the one I've got which I used to use to mount my nüvi 770 on a RAM Mount. Having done a quick search there are RAM cradles for other models of nüvi as well.

rovert57 · Feb 11, 2016

Hi i've got a nuvi 250 & 4595 so if you have a part no that would be great
Thwnks

Sent from my SM-G357FZ using Tapatalk

Schtum · Feb 11, 2016

rovert57 said:
Hi i've got a nuvi 250 & 4595 so if you have a part no that would be great
Thwnks

For the 250 -RAM-HOL-GA25U I can't find anything about a 4595, let alone a cradle ofr it. :nenau

pootle · Feb 18, 2016

Where did you get this, I searched for Alder a while back and couldn't find any trace of them?

Sent from my iPhone using Tapatalk

Schtum · Feb 18, 2016

pootle said:
Where did you get this, I searched for Alder a while back and couldn't find any trace of them?

Sent from my iPhone using Tapatalk

They're no longer trading. They became - http://www.motorrad-id.com

rovert57 · Feb 19, 2016

just thought I would report that the thread size for the adler mounts 9 small hole are 4m ,best get the 16 mm length .to be able to mount my car nuvi sat nav I bought a ram mount base which has four holes that line up with the holes in the mount itself , so will make do with this set up for a while .
thanks for the advise .

adler mount block

rovert57

Well-known member

rovert57

Well-known member

Attachments

Schtum

Iconoclast

rovert57

Well-known member

Schtum

Iconoclast

Attachments

rovert57

Well-known member

Schtum

Iconoclast

pootle

Registered user

Schtum

Iconoclast

rovert57

Well-known member

Attachments

Similar threads