Tomtom rider 2 vibration

RickSkye

Registered user
Joined
Jun 19, 2015
Messages
160
Reaction score
0
Location
Isle Of Skye
My tom tom has started to act as if the touch screen is being permanantly being pressed.
Turns out, it seems due to the vibration of my 2009 gs.
Has anyone had similar and have they found a mounting system that cures it?
 
You could cut a small piece of rubber or inner tube to wrap around the bar to clamp onto. I have done this for my Garmin mount and it has cured/dampened the vibration.
 
I wrapped some self amalg tape around one of the balls on the ram mount but it made it much worse.
I wil try your method though. It may have a different resonant frequency, if you know what i mean.
 
Well. It stopped the problem at low revs, great i thought, cracked it, but now it occours at higher revs. Grumph.
 
So. Now i tried altering the frequency of shake by putting a couple of lead weights on the sat nav. Worked a treat. Bit heath robinson, so i will need to tidy up, but at least i have found a solution.
 


Back
Top Bottom