R1100gs wires left over

chriswilliams

Registered user
Joined
Jun 22, 2012
Messages
93
Reaction score
0
Location
oswaldtwistle
Hello there

I have just finished installing a new clutch in my 1100 and there are tucked under my tail piece I have these 2 plugs and a block

My bike has a Remus pipe and the lambda is blocked off so maybe something to do with that .......any ideas ?

Thanks Chris
 

Attachments

  • wire 1.jpg
    wire 1.jpg
    39.2 KB · Views: 194
  • wire 2.jpg
    wire 2.jpg
    40 KB · Views: 191
Does the one with the spring clip not attached to the top of the air box temp probe?

If not might just be a redundant plug for the American market. Charcoal canister

Recognise the blue one but darned if I can remember what it is.
 
Does the one with the spring clip not attached to the top of the air box temp probe?

If not might just be a redundant plug for the American market. Charcoal canister

Recognise the blue one but darned if I can remember what it is.

I thought that ......but no ive attached that one
 
The block that you refer to is the CO2 pot, and resides on the top of the rear mudguard, right hand side just rear of the front seat. You will see the cut out in the mudguard where it fits.
 

Attachments

  • image.jpg
    image.jpg
    41.7 KB · Views: 137


Back
Top Bottom