Brake fluid renewal

Spud

Active member
UKGSer Subscriber
Joined
Jul 24, 2015
Messages
436
Reaction score
5
Location
Fylde England
My 2002 (non servo ABS) 1150 is due a brake fluid change.

Is there anything I should be particularly aware of or advice that I may need before attempting it ?
 
My 2002 (non servo ABS) 1150 is due a brake fluid change.

Is there anything I should be particularly aware of or advice that I may need before attempting it ?

Yes if the hoses haven't been changed get some braided ones fitted. The bleeding process is a simple on on a non ABS 1150. I'd suggest if you've not already done it bleed the clutch at the same time.

I took OP to mean he has ABS, but they're non-servo?

If so, these videos might help?

1/2:

 
My 2002 (non servo ABS) 1150 is due a brake fluid change.

Is there anything I should be particularly aware of or advice that I may need before attempting it ?

Don't drink brake fluid.
 
As above :D

I think that it's a case of bleeding at the ABS module first and then the corresponding circuit..match the nipples :rolleyes:
 
Lines are already Braided, and I promise not to drink the stuff :jager
 


Back
Top Bottom