- Joined
- Jul 14, 2010
- Messages
- 8,669
- Reaction score
- 457
you wanna pay for it?P3 cam, hig comp pistons, late LeMans big valve heads and big fuck off DelOrto pumpers ~ you know it makes sense
Andres
you wanna pay for it?P3 cam, hig comp pistons, late LeMans big valve heads and big fuck off DelOrto pumpers ~ you know it makes sense
Andres
Naughty Ash,
Thought you serviced it
P3 cam, hig comp pistons, late LeMans big valve heads and big fuck off DelOrto pumpers ~ you know it makes sense
Andres
No fingers being pointed,I could of never got the car rubbers back, so had to leave the air filter.
But did change diff oil when I put stainless plugs on, so it's only done 3.4k miles.
I did undo all the sump bolts to change engine oil/filter, only to find the guy I bought it off had done it, so I put a new gasket on and put the oil back in as it only did a 100 miles..
Look at the start pictures on my thread when I got it. Less than a month b4 I took it back to Mandello.
It looked OK until I pulled the fairing / panniers off & this greeted me ( in piccies.)
This is very true.One of the best looking motorcycle engines
Nice one Mikeyboy although I would add that if you don't already know, you're going to get fekk all out on the street for your body. Absolutely feck all.
He may well have changed the oil and filter but he didn’t clean the sump outI could of never got the car rubbers back, so had to leave the air filter.
But did change diff oil when I put stainless plugs on, so it's only done 3.4k miles.
I did undo all the sump bolts to change engine oil/filter, only to find the guy I bought it off had done it, so I put a new gasket on and put the oil back in as it only did a 100 miles..
Look at the start pictures on my thread when I got it. Less than a month b4 I took it back to Mandello.
It looked OK until I pulled the fairing / panniers off & this greeted me ( in piccies.)
An old school sand cast engine takes around 4 hours,the drilling’s are fairly simple and generally not blind.Just out of curiosity, how much time does it taketo clean the cases upafter vapour blasting?