As above. Seems a cracking bit of kit.
A couple of photos for anyone interested.
The oil hose from the unit it cable tied neatly to the clutch pipe to the slave cylinder, down and under the front sprocket cover (drilled small hole in this and cable tied tube to back edge of the cover) and along the swing arm to the rear chain 'fin'. The bracket that holds the pipe I fitted to the rear of the fin as you can see. You can see where I terminated the feed so it drops oil onto the chain just as it goes onto the sprocket.
Copying what I've done will save you an hour easily, working out where/how to run the tube took me that long and some trial and error. I was lucky I had a hand guard to fit the unit to as the brake reservoir is in the way on that side of the bar.
Sent from my iPhone using Tapatalk
A couple of photos for anyone interested.
The oil hose from the unit it cable tied neatly to the clutch pipe to the slave cylinder, down and under the front sprocket cover (drilled small hole in this and cable tied tube to back edge of the cover) and along the swing arm to the rear chain 'fin'. The bracket that holds the pipe I fitted to the rear of the fin as you can see. You can see where I terminated the feed so it drops oil onto the chain just as it goes onto the sprocket.
Copying what I've done will save you an hour easily, working out where/how to run the tube took me that long and some trial and error. I was lucky I had a hand guard to fit the unit to as the brake reservoir is in the way on that side of the bar.
Sent from my iPhone using Tapatalk