flytoolow
Registered user
Hi,
is there a basic "works every time" setup & synch guide for apair of Bing 32's?
Ive cleaned my carbs and finally got it all back together and runs a bit rough.
When fiddling with the air mixture I noticed that the other side was running a lot hotter (to the touch)..so I stopped. I didnt notice any noticable drop /increase in rpm no matter what mixture setting I used..
I there a good link somewhere about's ? i.e close the mixture fully in - open 1 full turn etc. I just feel as if Im adjusting things in the dark...
any help is appreciated..
F2L
is there a basic "works every time" setup & synch guide for apair of Bing 32's?
Ive cleaned my carbs and finally got it all back together and runs a bit rough.
When fiddling with the air mixture I noticed that the other side was running a lot hotter (to the touch)..so I stopped. I didnt notice any noticable drop /increase in rpm no matter what mixture setting I used..
I there a good link somewhere about's ? i.e close the mixture fully in - open 1 full turn etc. I just feel as if Im adjusting things in the dark...
any help is appreciated..
F2L