ATAS Engine Protection

Owen Snell

Well-known member
UKGSer Subscriber
Joined
Mar 10, 2008
Messages
2,133
Reaction score
0
Location
Gainsborough, England
I'm looking at options to protect the engine cases for when I tip the ATAS over. Have any ATAS owners on here fitted engine bars?
 
Fitted the Hepco and Becker (bit of a pain in the ass, but another pair of hands made it a little easier). Dont know how good they’ll be, but dropping the bike in the driveway should save the engine cases.
 

Attachments

  • 15BC0425-2104-43AC-B533-D3B694E261C8.jpg
    15BC0425-2104-43AC-B533-D3B694E261C8.jpg
    239.5 KB · Views: 306
  • 16D75A98-9523-4CCD-9252-076BDAACE5D8.jpg
    16D75A98-9523-4CCD-9252-076BDAACE5D8.jpg
    184.4 KB · Views: 276
shame the bars do not allow the gearstick option to be fitted.
 
Fitted the Hepco and Becker (bit of a pain in the ass, but another pair of hands made it a little easier). Dont know how good they’ll be, but dropping the bike in the driveway should save the engine cases.

They look OK. Thanks.
 
Can you remove the DCT Oil Filter?
 
So you bought direct from Germany ?

No. They will direct you to Motobins, their UK distributor.

That's where I bought mine.

As to a previous post. I've haven't been able to find engine bars that will fit with the optional gear change.
 
No. They will direct you to Motobins, their UK distributor.

That's where I bought mine.

As to a previous post. I've haven't been able to find engine bars that will fit with the optional gear change.

That’s what I thought but can’t find them on Motobins site

Edited to add, I emailed them and they sent me a link
 
I was looking at the Touratech lower engine bars - seems like they may be slightly easier to fit than the H&B ones, as you don't need to remove the exhaust. They are slightly cheaper as well.

Anyone fitted them?
 
Will the Touratech ones fit with the ATAS OEM bars?

I can't find any on their site specifically for the ATAS.
 


Back
Top Bottom