Results 1 to 6 of 6

Thread: LC4 Adv centreside & sidestand combination

  1. #1
    New Member (less than 15 Posts)
    Join Date
    Dec 2011
    Location
    West Sussex
    Posts
    5

    LC4 Adv centreside & sidestand combination

    I have a 03 Adv with both OEM centreside and sidestand, is it only possible to fit an aftermarket sidestand such as SW-MOTECH are there others? with the OEM centreside.

  2. #2
    Ditch the standard combined stand as they have a weak spot in the mounting bolt and fit any 2nd hand LC4 side stand, if it's not long enough just get it extended.

    That's what I've done with my ADV and it's fine

  3. #3
    Dream Maker Sgt Bilco's Avatar
    Join Date
    Jun 2005
    Location
    Worcester, England
    Posts
    9,879
    Quote Originally Posted by Timolgra View Post
    Ditch the standard combined stand as they have a weak spot in the mounting bolt and fit any 2nd hand LC4 side stand, if it's not long enough just get it extended.

    That's what I've done with my ADV and it's fine
    That's what snapped on mine on the TAT this year
    www.unchainedtours.com

    "Of all the forces that make for a better world, none is so powerful as hope.
    With hope, one can think, one can work, one can dream.
    If you have hope, you have everything."

    R1200GSA
    Yamaha XT600E

  4. #4
    New Member (less than 15 Posts)
    Join Date
    Dec 2011
    Location
    West Sussex
    Posts
    5
    Unsure of the term standard combined stand your using, the combination people seem to use is the OEM centrestand and a Motech sidestand to have both, I need a sidestand to get on and off the bike.

  5. #5
    Buy something like this
    http://www.ebay.co.uk/itm/KTM-640-LC...item3cbf1e36da

    If it leans over too far, get it extended.

  6. #6
    New Member (less than 15 Posts)
    Join Date
    Jan 2012
    Location
    London
    Posts
    1

    Click here to find out how to remove these ads

    I've used both the available options:

    1. the standard KTM parts for the 640 Adventure
    http://www.ktmpartfinder.com/
    2003 - 640 LC4 Adv EU - Attachments page

    but this is not as strong/long lasting as:

    2. the Dual Star weld on kit
    http://www.dual-star.com/index2/Bran...Side_Stand.htm

    it needs to be fitted professionally as the tab must be in the right place and at the right angle!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •