Results 1 to 4 of 4

Thread: Adjusting handlebar switchgear/controls R1200GS

  1. #1
    John Gates
    Guest

    Adjusting handlebar switchgear/controls R1200GS

    Tried a Q on the technical forum to no avail so I thought I'd try my fellow Northern GSers who must be civilised lot having both GS and North in their respective CVs.

    Here goes. Left and right handlebar control clusters are at different relative angles and just get on your nerves after about 10 mins riding. Anyone know which pinch/adjustment bolts/screws to slacken to level them please.

    Incentive; I will sell my brand new unused standard GS screen to the first with the right information at modest cost, with free delivery.

  2. #2
    Subscriber Click here to find out how to Subscribe
    Join Date
    Jul 2004
    Location
    Cork Ireland
    Posts
    873

    Ahh Switches GS 1200 and HP2

    you think you are hard done by, the switches are screwed into the handle bar itself , and on the gs they are steel , there is no way to change the angle of the switches like on jap bikes, as i find it hard to get to horn. On the HP2 the bars are alloy and the screw comes loose and elongates!, the whole grip and switch rotate, giving twin twistgrip syndrome , if you get my drift .
    If you pull your left grip away from the switch you should see the Torx headed screw.
    next time you see a used hp2 try rotating the Clutch side twist grip
    Some pics here

    http://picasaweb.google.com/Gunner1949

    http://s206.photobucket.com/albums/bb311/philgun/

    Irish Grid W77811 87158 -N 52"02.201 - W 008"19.448

  3. #3
    opinionated, me? Click here to find out how to Subscribe
    Join Date
    May 2005
    Location
    Kelsall, Cheshire
    Posts
    4,277
    The throttle side can be moved (IIRC) by removing the very small torx screw from the back of the housing and gently prising off the cover (The one facing forwards as you sit on the bike) This should expose a large torx screw which clamps the whole arrangement to the bars. The left hand grip is, as Phil said, screwed to the bar, so unless you fancy re-drilling and tapping a hole, it will have to stay where it is.
    HTH
    Mark
    Just when you've got this rat race licked, here come faster rats!

  4. #4
    John Gates
    Guest

    Click here to find out how to remove these ads

    Many thanks Philgunn and Earthmover. I think I will perservere until the next service and get Jefferies to do it after all.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Anyone attending a Ride Out or Event organised through the UKGSer Forums does so at their own risk.
UKGSer.com or anyone organising an event posted here will not be held responsible in any way for damage or personal injury sustained while attending any such events.

Members attending any such event do so at their own risk.

The text, images, graphics, sound files, animation files, video files, and their arrangement on this Website are all subject to copyright and other intellectual property protection. These objects may not be copied for commercial use or distribution, nor may these objects be modified or reposted to other sites without prior written permission.

Disclaimer: Use or depiction of the BMW logo or trademark throughout this web site is for illustrative and editorial purposes only, and to the benefit of the trademark owner, with no intention of infringement of the trademark.

The UKGSer Forums may include adult content for which it cannot be held responsible. Your use of this website constitutes acceptance of the UKGSER network privacy policy

"Its about being a grown up hooligan - and if that means a dark visor, remus open pipe and a bit of speeding out of town then all well and good"