r1200gs lc

  1. Tremeli

    Sold BMW Vario L&R Panniers

    The BMW R1200GS Left & Right Vario Pannier cases. They are sold as a set of one left and one right pannier, with the BMW part numbers 7160 7 660 564. See photo of part numbers for confirmation. All parts work well including locks (key included in sale). Some very light ware and tear from...
  2. R1200GS LC Cockpit fairing…

    Hi all - Anyone know if the 1-piece cockpit fairing from a late model (2018+) R1200GS LC directly replace the 3-piece setup on the earlier LC bikes (2013-2016)? The centre part of my fairing (the small, lower screen) is blemished and before replacing like-with-like wanted the chance to update...
  3. Trigger/Ignition switch on R1200GS LC 2017. Does this socket do the job?

    Hi all. There are many threads about getting a trigger point on older R1200GS on this forum but I am trying to work out what to do with a brand new R1200GS 2017. I am fitting 2 Roadhawk Bullet cameras to the bike. They were previously on my F800 Adventure and the trigger came from a socket by...
  4. Starter Switch Problem, Emergency work around, General info

    Hi, probably been posted before but here's what I learned yesterday getting my neighbours GS Started. QUICK SUMMARY: 1) You need a T9 Torx in your toolkit (Most kits start at T10). It needs to be narrow as the switch screws are up a deep hole. 2) The handlebar cluster switches tend to fail in...
  5. Wunderlich 2WD for R 1200 GS LC

    This appears to be a first - additional front-wheel drive for the R 1200 GS LC. Wunderlich developed a ten-kilowatt electrical front wheel gearbox, which, they say, gives the bike more propulsion on the ground and also draws it through curves on the road more quickly. Energy produced while...
  6. Denali Soundbomb

    Hi, I commute into London every day and really want to be head when I need to. I've looked at the Denali Soundbomb http://www.rg-racing.com/browsebike/BMW/R1200GS/2014/DENTTSB10000B/ + a connector from Nippy Normans...
  7. MartinS

    R1200GS LC BMW OEM Crash Bar Engine Bar (11/2013 on) torque values

    I had a bit of trouble finding this so posting here for others. This is for 11/2013 onwards 1200GS LC OEM (BMW original) crash bars, revised version (3 bolts). Front bolts upper and lower M8 - 19nm Rear lower M10 - 55nm HTH.


Back
Top Bottom