1200GS vs Autocom

[Bickers2812]

I wanted to pick your brains on where I would put the control unit for my Autocom on a 1200GS (57 reg).
I have recently upgraded from an aircooled, and was wondering if anyone on here has done it?

 

[Bryn]

Stick it in the tool tray.... you'll need to move the tools elsewhere though

Welcome to the site BTW

 

[lloyd]

Stick it in the tool tray.... you'll need to move the tools elsewhere though

Welcome to the site BTW

You can put the tool roll on top of the autocom

 

[GeorgeH]

Welcome....
I always had my older autocom in the tooltray area or directly above the battery, but when I upgraded to the autocom 200...it buzzed like hell if it was anywhere near the battery. I took off the silver side panel and have it tucked under there now...can't adjust it easily...but don't need to.

 

[Bickers2812]

Welcome....
I always had my older autocom in the tooltray area or directly above the battery, but when I upgraded to the autocom 200...it buzzed like hell if it was anywhere near the battery. I took off the silver side panel and have it tucked under there now...can't adjust it easily...but don't need to.

That is what I fancied doing ideally... stashing it under some bodywork rather than putting it next to my allen keys.
Thanks for the help.

 

[blobbs]

Take off one of the aluminium side panels and there is a gap large enough to push the autocom unit into