60CSx software update to version 3.60

[ebbo]

Changes made from version 3.50 to 3.60:
• Correct German translation of 'delete all waypoints'
• Fix data card unlock failure when 2 cards of the same map set are used in one device
• Improve sun times for polar regions
• Fix issue where ETA in non motor vehicle modes can be unreasonably short
• Improve robustness of compass when it would appear uncalibrated until a power cycle
• Increase precision of distance measurement to the cursor on the map page
• Allow backlight adjustment on the track back point selection page
• Fix shutdown when editing Estonian Grid coordinates
• Correct daylight saving time for New Zealand
• Improve selection of the names of cross roads with NT maps
• Correct potential shutdown when viewing a vertical profile

link to download below
https://buy.garmin.com/shop/store/downloadsDetails.jsp?id=1245&product=010-00422-00&cID=145&pID=310

 

[Navigair]

How are you mounting your 60? I`ve tried mounting mine on the left hanlebar but it fouls the hyd. resevoir and tank on full lock using the Garmin handle bar mounting kit.(1200GS)
Thanks for your help. Mike

 

[roddy]

Have a look here http://www.ram-mount-uk.com/bike-mount4.htm this is how I mounted my 60 it lets you move it about to avoid reflections

HTH

 

[Navigair]

Roddy-- thanks for your help....excellent solution! Rgds Mike

 

[ebbo]

I have the Ram mount and the Garmin cycle mount but haven't mounted the 60CSx on the bike yet, reason being the Ram mount has a death like grip on the 60CSx, it took me 2 days to finally summon the courage to prised it free from the bottom I'll need to attack that one with the dremmel before I try it in again.

As for the Garmin cycle mount, well, it would help if I could find it but from memory it had nearly as deathly a grip as the Ram