Anybody want to fit an 1100 back end in an Airhead?

[Rob Farmer]

Basically I've run out of time. Starting my new job in a few weeks so being realistic I'm just not going to have the time to do another project bike on top of the one I have already.

I have everything needed including the back wheel, 850GS bevel box, swinging, driveshaft, rear brake caliper and master cylinder, shock and another wheel rim.

If you're interested make me a sensible offer.

There's also a complete USD KTM front end with the stem machined for a BMW. Front wheel, brake caliper and handlebar master cylinder with brake line - just needs a front disk. sensible offer again.

I'll even throw in a Parlever frame for free (no log book with this one and some slightly dodgy bracing work carried out by the previous owner so don't get too exicited ) but it would let you mock up before fitting to your own bike.

 

[Vern]

What size are the forks mister?

 

[Rob Farmer]

err not sure without going out to measure but I think they're 50mm

The same as these. If you drop them through the yolk an inch and use a riser on the bars they work with the standard GS mainstand. They came from a 2002 KTM. I've also got a slightly older set of KTM USD forks.

 

[brassmonkey001]

Ooh! Ah! Erm...

 

[Rob Farmer]

It's basically this setup here without the mainstand I'll throw in the subframe if it's wanted.

to align the 1100 back whell you need to re spoke the wheel with some offset and fit a standard in line rim (new one included in the parts)

I'm not thinking silly money here.

 

[John Taylor]

Hi Rob,
Very interested you have PM.

 

[Picon biere]

r100gs bits for sale

Hi
Ive just seen your post. Very interested in the items for sale, however just off for a weeks tour on the 1150gs. Can I get a phone number from you? Im in Wallingford near Oxford.
Thanks
Todd

 

[Rob Farmer]

Hi Todd,

John Taylor has first refusal. He's coming round on Saturday.

Rob

 

[Picon biere]

Hi Rob
Thanks for the reply. Im not back untill the 29th of July so if bits are still available let me know. My email address is [email protected] I can access this from abroad.
Todd

 

[mungo57]

parts for sale

Interested in parts if still available, PM me about prices etc ,thanks.

 

[Kenny]

Mungo, you need to be a sponsor for Rob to pm you....besides, not sure he'd want it all to post to Australia !!

I'm probably sleeping with him in a field this weekend...I'll mention it to him then

 

[Rob Farmer]

Parts now sold to John taylor

 

[Deleted account 111026]

Make it a condition of the sale that the conversion is shown on here!