ARDcase on S10

denny

Registered user
Joined
Nov 5, 2010
Messages
463
Reaction score
1
Location
Istanbul
Don't have one yet, but am on the hunt for a Super Tenere.

I have a pair of 42ltr ARDcases on my 1150GS, which I'm very happy with and want to transfer onto my next bike.

Slight problem with the exhaust though, which I understand can't be stubby'd like the GS. Givi racks look symmetric and their 33ltr trekker cases don't look too bad with the left bag sticking out only slightly further than the other. However the Touratech rails look quite far out on the left. I could find any pics of matching cases on TT rails.

Anyone know of places that make symmetric pannier rails for the S10 that will work with ARDcases(with TT type puck fittings)...or any other way I can fit symmetric cases?
 
Roger at Ard Cases should be able to advise on racks. He used to be the agent for Holan racks but I don't know if that is still the case. Given the popularity of the S10 I'd say that he will know where you can get them.

HTH
 
ARDcase on s10

Hi Deny
The best option would be the Holan asymetric pannier rack . They sit closer than the Touratech and will fit the new model . The pucks will fit too . I dont know of anyone making symetrical racks though .I hope that helps .
Cheers Roger
 
Hi all, thanks for the replies. Didn't want to pester you with you with more of my PM's & questions Roger, thanks for the info. Do you still sell Holan parts? How much are they and what would delivery to UK & Turkey cost.

Cheers :thumb2
 
ARDcase s10

Hi Deny
I dont really deal with them . I tried recently but cannot get answers to my emails ! You may have more luck dealing directly.
Kind regards Roger
 
I've got Hepco & Becker QR frames on my S10, and H&B junior boxes ( part of a good deal I got)
At some stage I'll get a pair of Ard Cases to put on the H&B frames. :thumb2
 
Think I saw your thread about those, not sure if it was here or one of the S10 forums. Whats your plan with the ARDcases, equal size either side or asymmetric?
 
Think I saw your thread about those, not sure if it was here or one of the S10 forums. Whats your plan with the ARDcases, equal size either side or asymmetric?

The junior flash panniers are equal size and look fine ...I'd probably go for same size if I go for the Ard Cases.....unless there's a cut out for exhausts I reckon asymmetrical boxed always look odd
 
I have a set of Holan racks supplied by Roger some years ago, hanging in the garage if your after some :nenau
 
got them on there finally...

b2f96e3e23d02537ea8faff0f683f5b0.jpg
 


Back
Top Bottom