Bike turntable

[Yorkshire Twat]

Anyone got one of the 'easyturn' bike turntables.
If so any thoughts, deficiencies etc and what would be the best most useful size for a gs1250, 40 cm or 50 cm ?

Thanks for any constructive replies in advance

 

[3bikesnospace]

Not used the one you mentioned but made my own out of a 300mm lazy Susan bearing and a 4mm sheet of aluminium ,cost peanuts compared to buying, works great .

 

[blues n twos]

I’ve been using one of these for years, works a treat on my GSA

https://www.amazon.co.uk/Transfer-T...words=medical+turntable&qid=1654339369&sr=8-9

 

[Yorkshire Twat]

Blues n twos.
On a 247 kilo bike?

 

[ymfb]

I bought one off here, made from a lazy Susan bearing and a piece of roadsign, great bit of kit, used 4/5 times a week to spin a 1250GSA, 1250RT and latterly a Multistrada.

 

[PhilBoy]

Anyone got one of the 'easyturn' bike turntables.
If so any thoughts, deficiencies etc and what would be the best most useful size for a gs1250, 40 cm or 50 cm
Thanks for any constructive replies in advance

Easy turn 40cm, brilliant bit of kit. Bike is a 1250 gs.

 

[Yorkshire Twat]

Phil Boy
Ta very much, think that's the route I'll be taking
Sick of too and fro on a sloping gravel driveway

 

[Deleted account 260111001]

If you are anywhere near Spennymoor you can pop in and see one in use! I have the same model for my GSA

 

[Orbit]

I've been using mine daily for the last 4 years and still going strong. Probably the best bit of kit I've bought. BMW R1150GSA. I sometimes give it the occasional spray of wd40.

 

[Yorkshire Twat]

Thanks all for your constructive replies
Not anywhere near Spennymoor I'm afraid

 

[Scotsrick]

I got the 50cm one on the premise it would be easier to place the centre stand in the middle, although it doesn’t have to be exact.

I use it every time I’m out on the bike. Ride through the back gate, spin it on the turntable and roll it forwards into the shed.

Okay I could live without it but it saves a multi point turn on my artificial grass.

 

[LochLaddie]

I seen a clip of a BMW show room spinning a GS without a turn table so thought I would give it a go. Only difference I did was use the centre stand on a piece of ply wood and it worked a treat...

 

[fredaroony]

No what you asked about but I have these amazing stands and love them https://dynamoto.com.au/products/dynamoto-bmw

 

[blues n twos]

Blues n twos.
On a 247 kilo bike?

Yeah I know, had it 4 years now.