BMW Service Toolkit or Nippy Normans Cruz Toolkit or make your own?

[bottleofred]

Anybody have any thoughts about the three options of BMW Service Toolkit or Nippy Normans Cruz Toolkit or make your own?


Thanks for any advice

 

[Fluffmeister]

I'd say make your own, a Kriega Tool Roll and a few quid thrown at some Halfords Professional range tools and you are done, you can tailor it to exactly what you feel you need then as well. I put a decent Kriega tool roll together for around £50 using some existing duplicate spanners from my britool toolbox and some Halfords pro torx bits.

 

[Bendy toy]

A typical covered market tool supplier will have all you could need at very low cost. For example my torx/hex/ribe set has long and short of each size and two driver sockets all for under £20. They have stripped and rebuilt my bike and look like they'll last longer than I'll ever need them.
Spanners hex and torx keys suitable for a bike tool roll are equally low cost.

This look similar to what I have.
http://pages.ebay.com/link/?nav=item.view&alt=web&id=261642074001

 

[bottleofred]

Thanks for your replies. Very helpful. Thank you

 

[North]

Hi,

I brought the Cruz Tools DMX2 Tool Kit A few years back, and I have added a lot to it.

 

[JimVonBaden]

This might be useful: http://www.jimvonbaden.com/Tool_Kit.html

Jim