Bugger

[fleetwood]

My 2610 has been living in its box in a nice warm place over the winter, plugged it into the laptop the night .At first the mapsource was unable to find the 2610 but I have had this before no probs reinstall the drivers cd no problem it now can find the unit BUT when I try to transfer maps to the 2610 I get a error on the puter I am however able to send routes to the maps that were left on the gps and also send old routes to the puter this is the error message

 

[Peter Pan]

My 2610 has been living in its box in a nice warm place over the winter, plugged it into the laptop the night .At first the mapsource was unable to find the 2610 but I have had this before no probs reinstall the drivers cd no problem it now can find the unit BUT when I try to transfer maps to the 2610 I get a error on the puter I am however able to send routes to the maps that were left on the gps and also send old routes to the puter this is the error message

Are the maps from City Navigator v8 or v9?
Are you trying to download the whole of Europe or just the UK

Does it work if you reduce the number and size of the map set?

 

[fleetwood]

Are the maps from City Navigator v8 or v9?
Are you trying to download the whole of Europe or just the UK

Does it work if you reduce the number and size of the map set?

Em City nav v6 am waiting for v9 to drop through the door anyday now doesnt apear to make any difference about the size of the map even a small area returns the error Do you think a reset "on the 2610" would make any odds and em how is it done thanks

 

[Peter Pan]

I'm not familiar with the Master Reset process, but in a previous thread Wedders Gasman said :

"To master reset a 2720 you switch it off, hold buttons map and menu and switch the unit back on again. It is like hard booting a computer it clears everything and resets it to factory settings, basically it cleanses the unit."

This may also work for the 2610. Might be worth giving it a go ....

 

[Bumpkin]

From http://home.socal.rr.com/diverhank/SP26X0UndocumentedFeatures.htm

Hold down “PAGE”, “MENU” , and “FIND” then turn unit on to perform a Master Reset