Anyone know of a kit to lower the footpegs on a DRZ? I have already fitted bar risers but still find myself uncomfortable when standing.
DRZ Footpeg lowering...
- Thread starter macker1974
- Start date
Fern
Registered user
No, never seen any but I'm sure a local engineer could well er.. Engineer some for you. Where in the world are you?
Jammin
Registered user
I've chopped mine off & re-welded them. Lowers them by about 25mm.
Have you fitted high bars also?
Yep. Bars up 20mm but would just love to drop those pegs a tad. There's a nippy somebody missing a trick here!
Jammin
Registered user
I've raised my bars by 20mm & lowered the pegs by about 25mm & still feel hunched when on the pegs. I've been looking for a pair of higher bars, any ideas where i could have a look at some?
Renthal do a range of bars with differing heights. They have a "Dakar" bar which is available in 2 heights. I spoke to a really helpful chap at www.leisuretrail.co.uk. My current bars are 97mm and I have 20mm risers giving a rise of 127mm in total. The high Dakar bars are 130mm but it would appear that using these bars with my risers will give problems with cables/wires etc. might be possible to reroute everything but not sure how successful that would be. I'm not particularly tall at 5'10 but equally agree that I feel hunched over when I stand. Dilema continues!!
MuddySump
Registered user
Pivot pegz lower the pegs by about 10mm but its a lot of money just for a 10mm drop. I know some manufactures do pegs that lower about 20 - 25 mm. Cant remember who it was, it was on tiger 800 forum so not sure if there will be drz ones available too
Similar threads
