Fournales pumps

[Goodlookin]

Does anyone use Fournales shocks here?,
i do and i think my pump has gone tits up,i would like to try another before i splash out on a new one,Dragon rally next weekend and no air in my shock,so time is of the essence and i will travel to you
cheers

 

[brassmonkey001]

Try Halfords. I'll see if I can find a link.

 

[Mr K]

Not sure what pressures are involved, but would a "track pump" from a cycle shop be any use?
Racing bikes run quite high tyre pressures.

 

[brassmonkey001]

Here you go.

 

[Goodlookin]

Thanks for the quick response guy's,
the Fournales shocks(well mine anyway)runs at about 40 bar which is about 980psi,the shock is off the bike so i can take it down there and try it

 

[B1FF0]

Thanks for the quick response guy's,
the Fournales shocks(well mine anyway)runs at about 40 bar which is about 980psi,the shock is off the bike so i can take it down there and try it

I think you will find that 40bar = 580psi.
be careful not to overpressure!

 

[Goodlookin]

I think you will find that 40bar = 580psi.
be careful not to overpressure!

Absolutly right,
i was reading the chart incorrectly,
thanks Brassmonkey for the link,i went and bought one and now have air in the shock i'll just have to keep pumping when it gets to 300psi