Garmin 2650

  • Thread starter Thread starter steve16
  • Start date Start date

steve16

Guest
Been a few days now and I would guess the cheap 2650 's have been received.Just wondering who has mounted the unit and used it, and how is it performing ? Also how does the Garmin mounting bracket and lead work....
Cheers
:beerjug:
 
I got mine on Thursday evening Steve and received a RAM mount, cradle and power lead from Rollinsdan on Friday (thanks Dan :bow :thumb2 ).

Over the weekend I was away with Daithi and Jockser doing a recce for an upcoming event and the 2650 worked a treat. Tracking a route is quite easy and was a great help.

Some of the tabs needed changed to suit me, so I RTFM last night and found it quite easy to do. On my unit it was showing "Distance to Turn" and "Time to Turn" on one tab. I didn't want the "time to turn" detail so changed the tab to show the "Distance to Destination" which suits me better. It was quite easy to do and there are several options you can choose.

I had initially ordered a Quest and changed to the 2650 and upon reflection am glad I did. The larger (and fewer) buttons on the 2650 make it easy to use whilst riding with gloves on.

Even though I have v9 loaded some of the "roads" we were on over the weekend were not featured, although admittedly they were very few in number.

Overall I am very happy with the unit Steve. As a newbie to GPS it will probably take me some time to be fully conversant with all the features but it certainly does all that I will most likely be needing.
 
Steve, Aiden:

Congratulations on getting the 2650s. That exact GPSR (the 2650) will always be my all-time favourite from all the Garmin GPSRs that I have ever owned. The 26xx series was the last series to have an "engineering-driven" user interface (as opposed to the current "Your Mom can use it out of the box, without reading the manual" interface), and best of all, the 2650 will perform dead reckoning if you take the time to hook up a speedsensor to the motorcycle.

There are two inputs needed for dead reckoning - one is an input from a speedsensor, and the other is an input that tells the GPSR if the vehicle is moving forward or moving backward. For motorcycle purposes, if you have an electronic speedometer, you can just tap into the signal sent from the transmission, or rear wheel, or wherever the speedometer gets its signal, and use that. As for the 'forward-reverse' issue, on automobiles this is normally achieved by tapping into the reversing light (back-up light) to tell the GPSR when the vehicle is in reverse gear. Unless you ride a Gold Wing, you won't have such a light, but what works equally well - what I did on my ST1100 - was to tap into the 'side-stand down' annunciator light, and set things up so that if the side-stand was deployed, the GPSR assumed the motorcycle was being moved backwards. This makes sense, because if I am going to paddle the thing backwards in a parking lot, I normally have the side-stand out.

Although Garmin strictly forbids it, you can tap into the ABS speedsensor mechanism to get a speed pulse. If you choose to do this, don't tap in physically (in other words, don't cut any wires), instead, find a way to pick up on the pulses being sent by one of the ABS speedsensors without cutting into the system. I'm not an electronics whiz, so I can't tell you how to do this.

Once the GPSR has the speedsensor input, it will instantly (and I do mean instantly - within half a second) switch into DR mode if reception of the satellite constellation has been lost. This works exceptionally well in tunnels, when riding along valleys, through urban canyons, and so forth.

Regards,

Michael
 
Sounds like on an 1150 GSA without ABS the extra wires will stay in the box then...

Or is there another way of hooking it up?

Bryn :beerjug:
 
Sounds like the unit isn't picky on the frequency received by the sensor... It would be easy to rig something up with a bicycle magnet and reed switch from an old bike computer I bet...

Al...
 


Back
Top Bottom