Sold Genuine BMW Bar-Risers - R1300 GS / GSA / RT

Status
Please reply by conversation.

Geekay

Active member
UKGSer Subscriber
Joined
Jan 30, 2014
Messages
467
Reaction score
19
Location
Lancashire - UK
hi - i bought a new-to-me R1300GSA which has some bits i don't need so looking to sell them on.

This GSA was originally delivered with the BMW bar risers fitted for the previous owner. He had used "both blocks" you can use one or two blocks to raise the bars by 15mm using one or 30mm if you use both blocks under the bars. You use your original fitted clamps with these units.

I'm a it shorted in the body than the previous owner so wanted to go back to no-risers - Because the bike came delivered with these i didn't have any bolts to do so, so i have ordered the genuine bolts for the "no-riser" setting (and used them) - but i also ordered the "one-block" length bolt at the same time and of course, there are the "two-block" length bolts from the original fitment. I bought genuine BMW bolts (as seen in the image) so i could sell this lot as a package. (they were only a couple quid each to be fair).

Priced - i think - so you could "give them a try" and see if they improved your riding position - at £40 + £5 postage (in the UK) - they are priced similarly to the chinese replicas but you are getting genuine BMW quality for the price. Open to sensible offers too of course.

thanks for looking,
g

IMG_3516.jpeg
IMG_3518.jpeg

IMG_3517.jpeg

IMG_3519.jpeg

IMG_3520.jpeg
 
Status
Please reply by conversation.


Back
Top Bottom