Honda Range 2026
- Thread starter Arsey
- Start date
Not a single shaft drive in there.
Which decade was that photo taken in?
Sorry
Sorry
Well they still make the Goldwing but it wasn’t in the line up photo
Says the person who’s happy to pay £15k plus for a bike that uses a 15 year old motor as BMW had a shed full of them doing nothing.Which decade was that photo taken in?
Sorry
The irony …..
You know I looked at the wing at the nec last year and couldn’t believe how small the side panniers were as they are double skinned.
And like the BM version, I don’t get external speakers. Maybe because I have been using Cardo for years now.
I prefer this one.
That V3 will be a beast. Supposedly 150 hp plus.
Now stick it in an Africa Twin with DCT and I’m in !
Read all abaht it , performance of a 1200 from a 900. Classic Honda thinking, less is more
Honda Unveils V3R 900 E-Compressor Prototype Equipped with V3 Engine with Electronically-controlled Compressor at EICMA 2025 | Honda Global Corporate Website
Honda Global | Honda today unveiled the V3R 900 E-Compressor Prototype equipped with a V3 engine with an electronically-controlled compressor, at EICMA 2025 in Milan, Italy.
global.honda
I like that a lot , great tech too
I wish bike manufacturers would use belts.
Back in the early 90’s l did a project on converting chain drive to belt drive. The biggest issue was, at the time, belt technology was just about advanced enough to run on sometime like a triumph 1200. I cannot remember the margin of error/safety, I put in to the calculation, (well, it was a long time ago), but it clarified why, say, a Harley could use it.
I’m sure things have come on a long way since then, in belt, if not necessarily Harley technology.
Bmw used them on the 650CS single and I think on a few 800s. My friend has the CS, the belt worked well until around 40K when it was time to change it.
That ended up a hell of a task as the rear drum had worn very thin and was a nightmare to replace
honda range 1978
And the first H-D production model to use a Gates Belt final drive was ?
F800ST and GTs are all belt drive. Not a big job to replace at service time.
