how to --little round caps

[tosh23]

Im in the middle of stripping the GS and I thought this might be useful to someone...
How to get these little round caps off...

Ive read another thread on here somewhere but without pictures so...
As you look at the rear end of the bike...

Just above the exhausts you will see a little yellow line that's where you go in,
Just look closely and you will see this...

Look closely and you will see the little notch that you need to put your small flat
bladed screwdriver into, Get the screwdriver in there and push slightly
and twist anti-clockwise.

Then it should pop out of one side the the disc.
There is two tabs on the disc, so just get a small screwdriver and gently prise
the other side out being careful not to damage the plastic...

I hope this helps someone, Remember be patient, very patient and good luck...Tosh..

 

[Mr K]

Push from behind, on the "tangs".

 

[Farmer Palmer]

Nice clear pictures.

Took me a wee while to work that out on Mrs Ps GS. Mind you I didn't have to take the back wheel out and remove the numberplate.......!

What colour is your GS is it a kind of desert sand colour or just the camera flash?

FP.

 

[tosh23]

Standard yellow mate its just my mobile camera...Tosh.