Ipod/audio device where ?

Mech

Registered user
Joined
Mar 22, 2007
Messages
320
Reaction score
0
Location
Derby
I pod/audio device where do you have yours ? having fitted a intercom system to the 1150 I was wondering where you folks hide your music device ??

On another note fitting speakers in a Schuberth s1 was a job and a half :blast:blast took like 1.5 hours[had an issue with them rubbing on me ears had to cut away some of the polystyrene to set the speakers in a bit] fitted them in wife's Aria in 10 mins :augie:augie
 
... Ran phone and music leads to the front end.
... Put phone and MP3 player in a small Lowe-Pro digital camera pouch, just inside the screen by the instrument cluster. (The 1200 has a convenient bar to velcro around, but there is a huge variety of pouches available so there must be something suitable for 1150s)
... Sandwich bag inside pouch keeps it all waterproof
... Disconnect and hook the pouch on my belt when parking up.

... Cost about £4.99 in Currys
 
+1 for tankbag.

There is loads of space under the seat, more than you imagine so you can get it in there but you cant change track then so putting it in your tank back is a good idea!
 
Top Box - along with a multi power socket so I can power all the essential toys!
 

Attachments

  • autocom.jpg
    autocom.jpg
    17.1 KB · Views: 176
Ipod inside pocket, with ear moniters ( ear plugs with tiny speakers inside), with ipod remote clipped to jacket.
 
I mount mine here ...

In a effort to have access to the Ipod buttons and to rid the Autocom unit of noise on the Bike to Bike I mounted the Autocom on the Aux light switch plate and used 3M industrial velcro for the Ipod so it can be easily removed.

DSC_3529.JPG

DSC_3521.JPG

Does the trick for me :thumb
 
I keep my ipod in this tank bag, £16 from hein gericke.
the ipod goes in the front flap and has a clear screen so I can see whats playing and also operate basic functions.
the phone goes in aswell :thumb2

and I have an old ipod photo which is BIGGG

screenautocom004.jpg
 
This is my solution but will most likely get modified along the way

Handel bar mount made from thin stainless Velcro on I pod "O" ring for extra security and to hold jack plug when I pod not there

Image2.jpg


Starcom mounted on stainless bracket had to get in line suppressor to cut out clicking/whining niose £25 from starcom :spitfire:spitfire £7 from Halfords :D:D

Image1.jpg
 
Peli

I mount my phone and ipod on the crossbar in a Peli case, held on with stainless 12mm p clips and a cable tie, solid , waterproof, easy to take phone and ipod in and out, easy....2610 garmin on left of peli case.
 

Attachments

  • DSCF0072.JPG
    DSCF0072.JPG
    113.9 KB · Views: 105


Back
Top Bottom