It looks like the 2610 mount is the same as a Zumo

[BigAlMacMac]

if so then my exisiting Motorrad concepts mount for my 2610 will also work for the Zumo. True?

Though the Zumo looks like a much taller unit so might touch the screen.

Anyone with that experience?

Cheers

 

[Bumpkin]

StreetPilot 26xx, 27xx and 28xx series cradle (they all use the same one) is totally different to the Zumo one I'm afraid.

EDIT: Whoops... Sorry, thought you were talking about the fit of the unit.

 

[John Armstrong]

The SP3 / 26xx / 28xx GPS mounts from Garmin use the same basic layout for the 4 holes that you can use to bolt the mount to a RAM mount for example. So I'd guess that the Zumo will probably have the same hole layout, and space permitting, it'll bolt onto a mount that was suitable for a 2610.

Thought about using a spacer (or washers) and longer bolts to push the Zumo away from the mount / screen to give more chance of it not fouling the screen?

 

[Stumpy]

The concepts mount will work with the Zumo although as the unit sits lower in the mount you may "lose" the top of the rev counter. I found by unbolting the top of the mount and turning it 180 degrees it cures this although affects screen adjustment a little.

Stumpy