LED Indicators

[desertyellow]

Nippy Norman does LED idicators for £54.99 per pair for the 1200.
In the new Hein Gereicke collection page 235 they are selling similar for £13.99 and £15.99! Will these be suitable for the can bus system?

 

[ELIMINATOR]

I don't know what you mean by the 'can bus system', I assume you are concerned about the resistance, in which case you will also need item 8 the resistors.
But you may be writing about, what I believe is the fact that the wiring on these is a single feed & each component is sent a signal to activate it. In which case, it may not work, might be worthwhile taking an indicator apart & looking inside for suspicious gizmos, I.e. a receiver unit. This is purely conjecture on my part, please don't assume that I am right.

 

[BiG DoM]

I don't know what you mean by the 'can bus system', I assume you are concerned about the resistance, in which case you will also need item 8 the resistors.
But you may be writing about, what I believe is the fact that the wiring on these is a single feed & each component is sent a signal to activate it. In which case, it may not work, might be worthwhile taking an indicator apart & looking inside for suspicious gizmos, I.e. a receiver unit. This is purely conjecture on my part, please don't assume that I am right.

What size spec are those resistors, as my LED's flash very rapidly and I want to add a few resistors?