Wanted LoneRider MotoLights + Motocan

[Sly]

Spot beam too? And no fuse errors ?

Yep. Hex have installed an upcoming product into my bike to allow me to use 1x ezcan for both lights. I'm the guinea pig

 

[djgsa]

Yep. Hex have installed an upcoming product into my bike to allow me to use 1x ezcan for both lights. I'm the guinea pig

Ah ha!

Deffo keep me posted. I want one of whatever that is

 

[Sly]

Ah ha!

Deffo keep me posted. I want one of whatever that is

Quite handy for controlling various things on the bike. I have it set to turn the horn on & off (for now).

 

[Sly]

So something to note @djgsa

Both sets of ML on at 100% with fog lights and heated grips, your voltage can drop even whilst riding.

 

[djgsa]

So something to note @djgsa

Both sets of ML on at 100% with fog lights and heated grips, your voltage can drop even whilst riding.

So what is it that you have fitted ?
Does it use another channel off the EzCan?
And whats that button for ?
Are the light still not controlled by the "on bike" switchgear?
I don't mind the daytime lights being at 50%, even with a single set at 100% I was getting flashed at every time

 

[Sly]

So what is it that you have fitted ?
Does it use another channel off the EzCan?
And whats that button for ?
Are the light still not controlled by the "on bike" switchgear?
I don't mind the daytime lights being at 50%, even with a single set at 100% I was getting flashed at every time

I can't say much about what was fitted. It'll be out in a few weeks that should explain everything.

The button was more for my curiosity. Can set it to switch the motolights on/off, adjust brightness (all can be done on the whiz wheel). At the moment it turns on and off my Denali soundbomb. In future I want to use it for front and rear fog lights (might take a set of motolights off).

You run the ring lights at 50%? I have those at 100%. I don't have any of the main LED on as normal driving lights except at night.

 

[djgsa]

I can't say much about what was fitted. It'll be out in a few weeks that should explain everything.

The button was more for my curiosity. Can set it to switch the motolights on/off, adjust brightness (all can be done on the whiz wheel). At the moment it turns on and off my Denali soundbomb. In future I want to use it for front and rear fog lights (might take a set of motolights off).

You run the ring lights at 50%? I have those at 100%. I don't have any of the main LED on as normal driving lights except at night.

No, I run the ring lights at 100% they don't take much power.
I run the bottom lights at 50% for extra daytime visibility.
Daytime at 50% is more than enough and they are about the same brightness as the main bike headlight.
I want to run all 4 at 100% at night and when on full beam.

 

[Sly]

No, I run the ring lights at 100% they don't take much power.
I run the bottom lights at 50% for extra daytime visibility.
Daytime at 50% is more than enough and they are about the same brightness as the main bike headlight.
I want to run all 4 at 100% at night and when on full beam.

50% is bright mate! I run them at like 10%

 

[Sly]

No, I run the ring lights at 100% they don't take much power.
I run the bottom lights at 50% for extra daytime visibility.
Daytime at 50% is more than enough and they are about the same brightness as the main bike headlight.
I want to run all 4 at 100% at night and when on full beam.

Just rode behind the wife about an hour ago - she claims the lights are too bright as she was seeing circles