Moving Handlebars forward

[Wrinkly]

Morning Folks,
In an attemt to ease some pressure on the small of my back, whilst riding my recently acquired 1150gsa. I removed the bar risers and returned the bars to origional height,i then tilted the bars forward about 2" and loosened the switchgear and tilted all the switchgear, brake and clutch levers upwards so they were in a comfortable position.
The problem i have encountered is that the handguards will no longer fit properly,it looks as though it is due to the changed angle due to moving the bars and switchgear.
Will i have to return everything back to the origional positions or is there a way around it.
Has anyone any similar experience.

Thanks Steve

 

[ahebron]

Hi Steve, you could try Rox risers. Google them and you will see what I mean.

Adrian

 

[Wrinkly]

Thanks Adrian,
I have had to return everything to it's origional position for the handgaurds to fit.The bars are back to standard height which may help,but if not the "Rox" certainly look like a possible solution.

Steve