Pin Lock Visors .

[Sir James]

Wore my Shoei helmet today and i decided to steem up between the 2 visors

Hadn't worn it since it was washed and cleaned with soapy water , polished with a soft cloth , then left to stand overnight

Iv'e also noticed that there's loads of sctatches on the inner piece and it distorts your vision a little in the sun

Anyone else's done this

Should they last longer than this ,should i just buy a new one or complain to shoie

 

[Thunder]

Never had this happen with either the Multitech or the Hornet.

When you washed it did you remove the pin-lock and wash it as well or just washed the whole lot with the pin-lock fitted?

Could be the silicon bead on the pin-lock is damaged

 

[Deleted account 220427002]

Detol and a wire brush was for your bollocks not the visor

 

[Sir James]

Never had this happen with either the Multitech or the Hornet.

When you washed it did you remove the pin-lock and wash it as well or just washed the whole lot with the pin-lock fitted?

Could be the silicon bead on the pin-lock is damaged

It was washed cleaned and dried seperatly

I was wondering if any of that Ginger rain got in in Turkey

 

[Sir James]

Detol and a wire brush was for your bollocks not the visor

Hows the Parrot

 

[Deleted account W]

Your dog breath has rotted the seal, get a new one

 

[Sir James]

Your dog breath has rotted the seal, get a new one

Ooowe get you Butter Ball .................

PS , don't get a Lionel Blair this time

 

[Deleted account 220427002]

Hows the Parrot

Pretty foul mouthed

 

[Thunder]

It was washed cleaned and dried seperatly

I was wondering if any of that Ginger rain got in in Turkey

I'd get a new one James, think you've buggered the seal!

No wonder your barred from Seaworld

 

[illustratedman]

Pinlock

Mine did the same, when i had a close look one of the cams had turned slightly not giving a good seal between the insert and the visor, tightened up and the problem dissapeared. As to the visibility i agree it's not perfect but it does say on mine daytime use only and it's a clear insert so shoei must know the pinlocks arent 100% perfect.

 

[Sir James]

Mine did the same, when i had a close look one of the cams had turned slightly not giving a good seal between the insert and the visor, tightened up and the problem dissapeared. As to the visibility i agree it's not perfect but it does say on mine daytime use only and it's a clear insert so shoei must know the pinlocks arent 100% perfect.

I'll try that

 

[The Foolish Fellow]

fog city

it was the same with that fog city thing i used on an arai at one stage. I ended up removing it and getting one on those foggy face masks which works good.The fog city was especially bad at night.

 

[bsogri]

visor

you have probably polished through it you tart

 

[twisticles]

Yeah check the pins - they are not straight they are cam shaped. Maybe need to turn them so the insert is tighter against the visor.

I heart pinlock.