Question for RAM man (or anyone in the know)

[Cooky]

Dear Ram,

Friend of mine has 1200GS and has brought the Quest and standard cradle package. He's finding it very fiddly to fit the cradle and mount to the bike.

1. Is it possible to mount it to the handlebar using the standard mount?

2. If mounting to the bar just behind the screen are there any tips/special tools that help. Do you have to remove the screen?

many thanks

Andrew

 

[RAM-man]

1200GS + Quest + standard cradle package.

> Andrew is the cradle .. the RAM GA15 or the Garmin bike mount ?. RAM has a diamond base to attach onto whilst the Garmin mount has a round base that attaches onto their moulded bike bracket pillar ?.

1. Is it possible to mount it to the handlebar using the standard mount ?

> Andrew Please confirm back 'standard mount' parts you have ?.
If its the garmin then look at the Les Wassall thread
http://www.ukgser.com/forums/showthread.php?t=42053&highlight=quest

2. If mounting to the bar just behind the screen are there any tips/special tools that help. Do you have to remove the screen?
> Not necessary, the U-bolt bracket can be fitted to the oval arm going above the clock, or hooked into plate. Alec Muffett prepared picture gallery where he mounted his 2610 onto the 1200GS the forum thread is
http://www.ukgser.com/forums/showthread.php?t=43610&highlight=2610

Call me if you still need help, look at the banner at top of the page.

RAM-man

 

[Cooky]

I'm pretty sure it's the GA15 - I'll check -

Thanks for help.

 

[RAM-man]

I'm pretty sure it's the GA15 - I'll check -

Thanks for help.

Andrew - JG called and spoke to RAM-man, so I now have understanding of parts being tried, sent a RAP-319, let me know how JG gets on..

RAM-man

 

[Cooky]

thanks for sorting him out Steve.