S10

[Tobers]

How did you fit the new horn? Straight electrics linkup or did you need a relay?

 

[Big Den]

last a Wunderlich gs800 fender ext from NN, was perfect till i dropped the bike off the main stand
Well i wasn't expecting it to fit without mods so the heat gun and a gardening glove and its now remodeled

 

[Frankh]

All that bling now deserves the ultimate super tenere number plate S10ERE, selling my bike so putting this on retension on wednesday, so up for grabs at 500 quid inclusive of assignment fees. pm me if interested

 

[Davy F]

And now the plate you need.........

http://www.ukgser.com/forums/showthread.php?t=287318

 

[Big Den]

How did you fit the new horn? Straight electrics linkup or did you need a relay?

With a bolt
Ha, bought the magnum without connectors from NN but it came with them unbolt old one bolt on new one and connect, no mods needed, all i will say is the bolt on the magnum is a bit short so only just enough thread to fix it in place.

 

[Big Den]

All that bling now deserves the ultimate super tenere number plate S10ERE, selling my bike so putting this on retension on wednesday, so up for grabs at 500 quid inclusive of assignment fees. pm me if interested

Tempting but £500 will also buy some nice luggage
or 5 nights on the piss

 

[wreck diver]

Hi Den,Did the TT screen adjusters work for you?

 

[Big Den]

Not had chance to try it out yet mate, i have high hopes as they have so many adjustments

 

[Stretchamus]

or 5 nights on the piss

Love it

Also, great choice of bike Den, would like one myself

Best regards Stretch

 

[Big Den]

Few bits fitted

Fuse box fitted for future farkles and the first being a din socket on the dash, also fitted a K&N while i was in there, they come apart easy but lost a breather hose clip which has gone to the great garage black hole
If there is interest i may upload some photos but the resizing malarky is a pain in the ass

 

[Little le800GS]

How does it go with the new filter in, and post a pic please

 

[wreck diver]

Den,if you are ever passing through Worcester give me a shout and drop in for a coffee.
I would luv to see the new bits on the S10.

 

[Big Den]

How does it go with the new filter in, and post a pic please

Coming up

 

[Big Den]

Den,if you are ever passing through Worcester give me a shout and drop in for a coffee.
I would luv to see the new bits on the S10.

Very soon as i am nearing the 600 mls and me 50 yr anniversary jacket has arrived, they have Nick Sanders doing a chat soon at the other branch, if you want to cadge a ticket off Brian

 

[Big Den]

comes apart easy

 

[Big Den]

screw No. 10 is under the rubber bung, pull to remove

 

[Big Den]

See the little silver pinch clip on the end on one of the breather pipes well his mate from the overflow pipe next to him fecked off into the garage black hole of lost fittings, spent two nobbin hours searching for it. So when lifting the tank (side panels off, one bolt either side, slacken rear pivot bolt) reach in and pull some slack on the breather/overflow pipes attached to the underside of the tank or the clips will ping off
Standard filter is paper but by the look and smell has some sort of oil substance on it.

 

[Big Den]

Not impressed with the fit of the K&N, i have had dozens of these in all my bikes over the years but if you look at the top plate edge it looks like the YTS kid trimmed it

The strange fitting on the underside of the tank will rust if not treated early

 

[Big Den]

Fuse panel fitted and first run off it being a din socket
Supply for heated vest and oxford grips to follow

 

[Big Den]

All sorted


This is the ABS diag socket and need to come out of the bag as over time it will condensate and corrode