Stainless steel brake line

[SJRoome]

hi

Anybody know where I can get a stainless steel brake line to replace the lower solid brake line on the brembo fitted to my 1989 R100GS?


Steve

 

[John Armstrong]

A decent pipe maker should. A local bike shop made one for me to go from the master cylinder down to the caliper.

But check they do a proper job otherwise you'll be pulling off the HE brake upgrade to return back to the standard beastie the night before you go away

 

[brassmonkey001]

Why not replace the whole lot with a braided hose?

 

[cookie]

Why not replace the whole lot with a braided hose?

the job will look a lot better with a replacement solid pipe, a slightly longer one than stock if you're using the HE kit.

routing a braided hose around the fork leg always looks a bit odd IMO.

 

[JPR]

Why not replace the whole lot with a braided hose?

Did mine with a stainless braided hose.
Looks fine with the proper offset banjo on the caliper.

 

[John Armstrong]

Did mine with a stainless braided hose.
Looks fine with the proper offset banjo on the caliper.

Got a piccy or two

 

[John Armstrong]

One thought, Scrimingers.

http://www.scriminger.co.uk/

Local firm makes them and pressure tests them, allegedly

 

[Redboots]

the job will look a lot better with a replacement solid pipe, a slightly longer one than stock if you're using the HE kit.
routing a braided hose around the fork leg always looks a bit odd IMO.

+1 300mm will do it.

John