For the older Tossers amongst you, it's at RAF Honeybourne.
Just to the right of the South end of N/S runway..
Tally Ho Biggles !!!
Just to the right of the South end of N/S runway..
Tally Ho Biggles !!!
Steptoe Equivalent?
- Thread starter oilcan
- Start date
Are there any slots available with Steptoe on the 5th ?
Valve set up/throttle bodies and alternator belt.1150 GS.
Cheers.
Valve set up/throttle bodies and alternator belt.1150 GS.
Cheers.
no problem taking my slot if steptoe is running short of time as i can pop my bike down to him
Cheers,thanks for that
Got any crashbars fitted ? what type ?
no crashbars fitted .
Change of bike.. taking the 1150 apart for a re-spray, so I'll take my 80 G/S instead for a genarel check over, carb balance, valves, besides, I thought I'd break up the monotony for Steptoe
are you riding down or bringing it on a trailer
I've put a sticky thread with the details of the day
: 
I'm also happy to help out with any fitting and spannering whilst Steppers gets on with the techie stuff
Hi Mike, if its ok I'll pop in and say hello and give you that charity money hat I keep meaning to send you!
Hi Mike, if its ok I'll pop in and say hello and give you that charity money hat I keep meaning to send you!
Hi Si, sadly mate I can no longer make it as I now have a CBT to do on Saturday. I'll catch up with you one day
Hi Si, sadly mate I can no longer make it as I now have a CBT to do on Saturday. I'll catch up with you one day
Bugger!
Hi Si, sadly mate I can no longer make it as I now have a CBT to do on Saturday. I'll catch up with you one day
Is it OK if I step in? 98 R1100GS with slight surging issue. Could I get throttle bodies balanced and rocker end float and valve clearances checked and adjusted if required (how do you tell
), please?
brassmonkey001
I should change this
Neil, do you fancy having a look at my F650GS? It's running a bit rough and cuts out occasionally.
Is it OK if I step in? 98 R1100GS with slight surging issue. Could I get throttle bodies balanced and rocker end float and valve clearances checked and adjusted if required (how do you tell
Roll up just after lunch and Neil will get you in. It's unlikely Bart will be able to make it so here is the latest running order:
9.00 am: Oilcan (1100GS)
10.00 am: Big Den (1100GS)
11.00 am: Wreck Diver (1100GS)
Midday: Grim Reaper (TBC)
2.00 pm: Bobble (Airhead)
3.00 pm: Ronnie69 (1150GSA)
4.00 pm: Mad Moose (1100S)
5.00 pm: Sgt Bilco (1100GS)
Is it OK if I step in? 98 R1100GS with slight surging issue. Could I get throttle bodies balanced and rocker end float and valve clearances checked and adjusted if required (how do you tell
Roll up just after lunch and Neil will get you in. It's unlikely Bart will be able to make it so here is the latest running order:
9.00 am: Oilcan (1100GS)
10.00 am: Big Den (1100GS)
11.00 am: Wreck Diver (1100GS)
Midday: Grim Reaper (TBC)
2.00 pm: Bobble (Airhead)
3.00 pm: Ronnie69 (1150GSA) No, dude, mine's an 1100GS 1998 vintage
4.00 pm: Mad Moose (1100S)
5.00 pm: Sgt Bilco (1100GS)
Sweet - nice one, thanks
BTW, just after lunch = 3pm ..... ?
- can I have a job where you work? Joking aside 
, should I rock up around 2pm ish? On the one hand, I don't want to freeze my kahunas off by turning up too early (and it's not like I'm much help with a spanner to busy myself assisting with other folks's jobs, thereby keeping myself warm, while I wait), but I also don't want to turn up too late and risk wasting Mr Steppers's (or anyone else's) time. I also have approx 2 hour run each way for extra chillyness! BrrrrrrrAlso, at the risk of pedantry, mine is an 1100GS, not 1150GSA
Thought I'd best say in case it makes any odds 
Any issues/concerns, just post up here or PM me - at the risk of sounding like a big girl or
, it is one of my missions in life to cause as little hassle as possible to others 
Good effort setting this up
- hope the likes of me aren't making you regret it.
ronnie if time is pushing on i dont mind not having my bike looked over as i can pop it down to london in the spring so we should have time to have your bike looked over
brassmonkey001
I should change this
Al, have a trundle down and I'm sure he'll have a chance to have a peek
Will there be diagnostic equipment available?
I'm not too fussed about a fix, if Neil can tell me what the problem is I can fix it myself later. Unless it needs tweaking with a special BMW computer or something like that.
Similar threads
- Locked
