Touratech Fog lights

[Will.i.am]

Hi everyone,

This is my first post but have been using the forum for a while now.

Bought a 2012 GSA a few weeks back, love it to bits.
It came with two touratech fog lights which i use continuously. One was not working at first, so i replaced the bulb, then both have been working for a couple of weeks until today when i realised both have now stopped working!

Bulbs look ok so im not sure they have blown, although nor did the original one i changed?

Any ideas?

 

[Farmer Palmer]

Hi Will.i.am and welcome to UKGSer

Check the fuses, the wiring connections and the relay........I had a set on my R1150GSA that i'd fitted to my bike myself and had a faulty connection after a couple of years caused by some corrosion on the connectors.

Give everything a wee 'waggle' to see if you can get the lights working again and spray all the exposed joints and connectors with WD40 or something.

Hope that helps

FP.

 

[Will.i.am]

Thanks,

Where would the fuse and relay be situated on the bike? Can't seem to find them! Don't really know anything about the electrical system on this bike!

 

[ghiribizzo]

The bike doesn't have a fusebox like you may expect, as the usual stuff is taken care of by the canbus system.
But the aux. lights are an 'add-on' when the factory set-up is fitted and it has a fuse plus a relay wired in. Follow the wires back from the lights. But if Touratech lights have been added - who knows.