TT pannier rails

[jinkxy]

I have a second hand pair of 1150GS TT pannier rails that I want to fit to a 1150GSA but don’t have the fittings, any one know what bolts/fittings I wil need?

 

[Nick Marshall]

as no one else has replied..

if its just the mounting screws that you want, i thinks i have a few spare sets as i usually change to s/steel. I guess they are a mix of about 4X M8 cap head bolts for footrests and the front mount under the seat. Then a couple of cap head M6 for the other mount under the seat near the rear light. Then a couple of cap head M6 bolts nuts and washers for the bar at the back that joins the two pannier rails.

could measure the length, but going to bed now.

 

[jinkxy]

if its just the mounting screws that you want, i thinks i have a few spare sets as i usually change to s/steel. I guess they are a mix of about 4X M8 cap head bolts for footrests and the front mount under the seat. Then a couple of cap head M6 for the other mount under the seat near the rear light. Then a couple of cap head M6 bolts nuts and washers for the bar at the back that joins the two pannier rails.

could measure the length, but going to bed now.

Thanks Nick

now sorted, nipped in to Touratech this afternoon were a very helpful nick plumb sorted me out with the relevant bolts