speedo

i put a garmin street pilot 111 on instead, the right size an shape
 
i put a garmin street pilot 111 on instead, the right size an shape

Not just me then! :thumb2

Great for seeing how far out your mechanical speedo is, all 4 of my vehicles over estimate my actual speed.
You can pick up old SP3s on eBay for around £50, I've got 3 of them! :)

I made up a mount that bolts to the bar clamps on my 350, works very well.
Just need to set up a mount on my 400 now.

3Trail.jpg
 
theres tapped holes ready at the front of the top yoke
 
theres tapped holes ready at the front of the top yoke

Didn't notice any on mine but I do have bar raisers fitted.

I've just finished the last of the little jobs on my 400E. Speedo bulb blown.

2 weeks into ownership & I'm happy now! :beer:

SpeedoLight.jpg


SpeedoLightFitted.jpg
 
this is my 400 wi garmin, (phone camera)
ABCD0015.jpg
works good
 
theres tapped holes ready at the front of the top yoke

Now I see your picture I know what holes you mean.

I have cable cleats & a guide for the brake hose bolted there. (bottom picture, post #5)

My fuel tank breather hose goes down the steering stem & I'll be bolting the Garmin to a bracket secured to the 2 rear bar clamp bolts.
 
Great for seeing how far out your mechanical speedo is, all 4 of my vehicles over estimate my actual speed.

On the OE speedo for the DR-Z 'S' model, you can adjust the speed and mileometer reading to compensate for different wheel sized.

IIRC you can go +/- 40% in 1% increments.

FWIW the 'S' models have a different front wheel with speedo hub drive lugs.

Greg
 


Back
Top Bottom