check radiator connection to frame

Brommer

Registered user
Joined
Oct 7, 2008
Messages
247
Reaction score
0
Location
netherlands
I cleaned the bike an check a thing or two yesterday..
THe radiatoe to the frame connection ( 4 points) were loose....
it missed the circlip and the washer of 3 out of 4. therefor the radiator vibrate a bit.


the circlips can come loose or after checking the valves are not properly installed again.

if you look at the repair manual dvd at the pic of the radiatoe you see
bits 11 10 17 18. So check it once in a wile.
 
bought some washer and circlips (OEM bmw) number 17 and 18 in the reprom.

but how the hell do you get the circlip lock on....
its not a circlip with an open side, its a fully round circlip and it is though...
going to buy open circlips tomorrow but if any one knows the trick for the closed circlips... let me know.

ps: there was one open circlip with no washer behind it, i guess the mechenic of the bmw dealer didnt know either.....
 


Back
Top Bottom