Stainless steel camcover fasteners.

Ijustwanttoseethephotos

Registered user

Joined

Aug 4, 2012

Messages

201

Reaction score

0

Location

France

• Mar 23, 2014

• #1

Question answered!

 

MikeP

UKGSer of 2014 (Dead)

UKGSer Subscriber

Joined

May 15, 2004

Messages

14,074

Reaction score

2

Location

Plymuff

• Mar 23, 2014

• #2

Ijustwanttoseethephotos said:

I've a customer K1 in for repair at the moment and I've noticed that his engine has the 16V and K1100 type covers yet uses the earlier 8V fasteners with a flanged washer between the head of the fastener and the rubber seal.

Click to expand...

The K1 should have the same covers and screws as all the subsequent 16v models.

If the early type ones are fitted, that would suggest that they have been substituted and work.

 

Ijustwanttoseethephotos

Registered user

Joined

Aug 4, 2012

Messages

201

Reaction score

0

Location

France

• Mar 23, 2014

• #3

Hi Mike, the K1 parts fitted are totally different to the early ones and the later ones. The parts are individually shown on the original K1 parts list but the part numbers have been replaced by the latest version.
It appears they were a short term version only.