unused connectors?

dazco

Guest

• Aug 26, 2006

• #1

hiya, im just in the process of stripping the back end off my '96 1100, in order to re spray the rear frame section.
There are two connectors(Proper BWM ones, which look original) One has three wires Brown/green,Brown/Blue and Brown/Black.
The other is similar to the connector that clips onto the Air filter housing,ie with the little metal locking tab and these Green/White and Green/Blue.
Anyone got any idea what they are for?
Not causing any problem , but just curious to know
Cheers Dazco

 

Fanum

Toubab

UKGSer Subscriber

Joined

Apr 26, 2003

Messages

48,939

Reaction score

2

Location

Secure unit 2

• Aug 26, 2006

• #2

Don't know for sure on the 1100 but it sounds like the connections for the American market only charcoal cannister.

 

dazco

Guest

• Aug 26, 2006

• #3

could you try and be a bit faster next time , i had to wait 4 minutes lol Cheers matey, ill get back to sanding the paint off now

 

Rob Farmer

Well-known member

UKGSer Subscriber

Joined

Feb 25, 2002

Messages

15,612

Reaction score

2

Location

Vale of Belvoir

• Aug 26, 2006

• #4

The blue connector, with three wires, is the diagnostic connector for the Motronic and ABS. You can read the diagnostic fault codes on the 1100 using an analogue meter.

 

Steptoe

What a waste.

UKGSer Subscriber

Joined

Oct 12, 2003

Messages

65,673

Reaction score

1,671

Location

S/W London.

• Aug 26, 2006

• #5

Robs right on the 3 pin connector -

The other connector sounds like it's the CO pot connector, which lots of bikes don't have fitted.

 

Deleted account 220427002

Registered user

Joined

Dec 27, 2003

Messages

20,428

Reaction score

3

• Aug 26, 2006

• #6

Is that not where you connect the extra special go fast part is it?

 

dazco

Guest

• Aug 26, 2006

• #7

thanks for that, just found connector in cymer manual wiring diagram(eventualy) and it is for the diagnostics , cheers anyway

 

dazco

Guest

• Aug 26, 2006

• #8

oops thats clmer , what a d--k