I have a 1200GS 2006 model that has covered 58000 - and due to go on a NC500 tour, leaving tomorrow morning! Bike had started misfiring so followed Bendy Toy's tips and popped off the coils one by one. Turned out to be the RH secondary coil that was playing up as the LH pipe gets red hot and the RH you can take hold of.
Ordered one of the new type shiny secondary RH coil from Motorworks, along with a new primary - just as a backup being interchangeable.
Just arrived via DPD - fitted the new coil and...nothing, the pipe is still cold and only running on one?
I have done the obvious like changing the spark plug for a second hand one that I had, but also still nothing. The wiring all seems to be OK, but not sure where to go from here.
Does anyone have any ideas as my wife has started the packing
Many thanks
Paul
Rotaxmaxracer
Ordered one of the new type shiny secondary RH coil from Motorworks, along with a new primary - just as a backup being interchangeable.
Just arrived via DPD - fitted the new coil and...nothing, the pipe is still cold and only running on one?
I have done the obvious like changing the spark plug for a second hand one that I had, but also still nothing. The wiring all seems to be OK, but not sure where to go from here.
Does anyone have any ideas as my wife has started the packing
Many thanks
Paul
Rotaxmaxracer