mouthfulloflake
Registered user
Nylager Nushings are Pivot bushings for BMW airhead and oilhead bikes,made from Molybdenum di sulphide impregnated Nylon 6/6
- it is very strong and slippery stuff
These bushings replace the tapered roller bearings that attach the swing arm to the final drive of many BMW bikes. OEM part number 33 17 2 311 091
NEEDLE BEARING - 10X32X17 ( application chart below)
The OEM bearings are manufactured by FAG bearing company in Germany, solely for BMW under contract. No other source of these bearings has been found. They are currently $95.06 each (2017) they were $85 last year. We can assume that the OEM bearings will continue to climb in price, until perhaps they are so expensive, and such low volume that BMW/FAG decide to no longer produce them.
Nushings were designed to replace those tapered roller bearings using the OEM pivot pins. Using high strength Nylatron with Molybdenum Sulfide impregnated within.
( They are self lubricating! )
Installation is simple, no special or factory BMW tools are required.
They are lightweight, small, and easy to carry as spares on a long trip.
(Installation instructions can be found in the link below)
https://docs.google.com/document/d/1bqMe-xntvPWArrF55-WHbYY2WaVZ8ZEEnOd_8KO2EjI/edit
These are the very latest variations of a long experimental lineage of NyLager Nushings.
They are working well in hundreds of airhead and oilhead BMW bikes all over the world.
Applications for Nylager Nushings:
K1200GT
K1200RS
R100R
R100 Mystik
R1100GS
R1100R
R850R
R1100RS
R1100S
R1100RT
R850RT
R100GS
R80GS
K100RS
K1100LT
K1100RS
K1200LT
K1200RS
R1150GS
R1150RS
R1150RT
R1150R
R850R
##########################
http://nushings.com/
##########################
$59.95 per set
Shipping: ( for up to 4 sets)
$4 USA
$8 Anywhere else in the world
To order just check out this absolutely terrible website!
http://nushings.com/
Or email me ----> nushings@gmail.com
paypal address is ---> nushings@gmail.com
For questions, discussion, ideas, or complaints please email nushings@gmail.com
- it is very strong and slippery stuff
These bushings replace the tapered roller bearings that attach the swing arm to the final drive of many BMW bikes. OEM part number 33 17 2 311 091
NEEDLE BEARING - 10X32X17 ( application chart below)
The OEM bearings are manufactured by FAG bearing company in Germany, solely for BMW under contract. No other source of these bearings has been found. They are currently $95.06 each (2017) they were $85 last year. We can assume that the OEM bearings will continue to climb in price, until perhaps they are so expensive, and such low volume that BMW/FAG decide to no longer produce them.
Nushings were designed to replace those tapered roller bearings using the OEM pivot pins. Using high strength Nylatron with Molybdenum Sulfide impregnated within.
( They are self lubricating! )
Installation is simple, no special or factory BMW tools are required.
They are lightweight, small, and easy to carry as spares on a long trip.
(Installation instructions can be found in the link below)
https://docs.google.com/document/d/1bqMe-xntvPWArrF55-WHbYY2WaVZ8ZEEnOd_8KO2EjI/edit
These are the very latest variations of a long experimental lineage of NyLager Nushings.
They are working well in hundreds of airhead and oilhead BMW bikes all over the world.
Applications for Nylager Nushings:
K1200GT
K1200RS
R100R
R100 Mystik
R1100GS
R1100R
R850R
R1100RS
R1100S
R1100RT
R850RT
R100GS
R80GS
K100RS
K1100LT
K1100RS
K1200LT
K1200RS
R1150GS
R1150RS
R1150RT
R1150R
R850R
##########################
http://nushings.com/
##########################
$59.95 per set
Shipping: ( for up to 4 sets)
$4 USA
$8 Anywhere else in the world
To order just check out this absolutely terrible website!
http://nushings.com/
Or email me ----> nushings@gmail.com
paypal address is ---> nushings@gmail.com
For questions, discussion, ideas, or complaints please email nushings@gmail.com