Page 1 of 2 12 LastLast
Results 1 to 16 of 19

Thread: BMW paralever pivot bushings NUSHINGS

  1. #1

    BMW paralever pivot bushings NUSHINGS

    Nylager Nushings are Pivot bushings for BMW airhead and oilhead bikes,made from Molybdenum di sulphide impregnated Nylon 6/6
    - it is very strong and slippery stuff

    These bushings replace the tapered roller bearings that attach the swing arm to the final drive of many BMW bikes. OEM part number 33 17 2 311 091
    NEEDLE BEARING - 10X32X17 ( application chart below)

    The OEM bearings are manufactured by FAG bearing company in Germany, solely for BMW under contract. No other source of these bearings has been found. They are currently $95.06 each (2017) they were $85 last year. We can assume that the OEM bearings will continue to climb in price, until perhaps they are so expensive, and such low volume that BMW/FAG decide to no longer produce them.

    Nushings were designed to replace those tapered roller bearings using the OEM pivot pins. Using high strength Nylatron with Molybdenum Sulfide impregnated within.
    ( They are self lubricating! )

    Installation is simple, no special or factory BMW tools are required.
    They are lightweight, small, and easy to carry as spares on a long trip.

    (Installation instructions can be found in the link below)

    https://docs.google.com/document/d/1...d_8KO2EjI/edit

    These are the very latest variations of a long experimental lineage of NyLager Nushings.

    They are working well in hundreds of airhead and oilhead BMW bikes all over the world.

    Applications for Nylager Nushings:

    K1200GT
    K1200RS
    R100R
    R100 Mystik
    R1100GS
    R1100R
    R850R
    R1100RS
    R1100S
    R1100RT
    R850RT
    R100GS
    R80GS
    K100RS
    K1100LT
    K1100RS
    K1200LT
    K1200RS
    R1150GS
    R1150RS
    R1150RT
    R1150R
    R850R

    ##########################
    http://nushings.com/
    ##########################

    $59.95 per set
    Shipping: ( for up to 4 sets)
    $4 USA
    $8 Anywhere else in the world




    To order just check out this absolutely terrible website!

    http://nushings.com/

    Or email me ----> nushings@gmail.com
    paypal address is ---> nushings@gmail.com

    For questions, discussion, ideas, or complaints please email nushings@gmail.com

  2. #2
    For the rest of the month of October, special deals!

    Direct email to nushings@gmail.com for ordering ONLY!

    two sets of Nushings for $95
    three sets of Nushings for $130
    Four sets of Nushings for $170

    flat shipping rates: $3 in the USA/ $5 anywhere else.

    Sale is valid ONLY via emails direct to nushings@gmail.com

    if you order through Nushings.com you will not get these prices!
    ( I do not have time to reconfigure the website right now, the website will only sell Nushings at the normal $59.95 price)
    Consider this a limited time UKGSer insider discount !

    email me for your special priced orders
    nushings@gmail.com

  3. #3

  4. #4
    The 20% sale ended last week, but keep an eye on the website for upcoming specials.

    Also, I am about to add another product, a "kit" for going inside the tank.

    -Stainless Steel U bend to replace the failure prone and expensive rubber U bend

    -4" of the proper hose for high pressure submersed in fuel ( enough to install the U bend)
    proper fuel injection type clamps

    -the large O ring ( in VITON) for the fuel pump plate, you will never have to replace this O ring, and it will not be effected by gasoline.


  5. #5
    I can not take credit for this video, but it is a very good and detailed guide to installing Nushings.

    Thank you Juan!

    https://www.youtube.com/watch?v=5896qiDY6xc

  6. #6
    Nushings, stainless U bends, and Fuel tank kits are all available, ( the new kits contain 6" of the proper fuel line)

    http://nushings.com/#/

    kits are not on the website yet, but just shoot me an email if you want one.

    nushings@gmail.com

  7. #7
    Subscriber Click here to find out how to Subscribe
    Join Date
    Apr 2003
    Location
    The corner of Miles and Gil
    Posts
    2,287
    Quote Originally Posted by mouthfulloflake View Post
    Nushings, stainless U bends, and Fuel tank kits are all available, ( the new kits contain 6" of the proper fuel line)

    http://nushings.com/#/

    kits are not on the website yet, but just shoot me an email if you want one.

    nushings@gmail.com
    Whats the price going to be?
    R1150GS | R100/7

  8. #8
    Quote Originally Posted by Sergeant Pluck View Post
    Whats the price going to be?
    $42 with international shipping

    $39 shipped within the USA

    also, Nushings are on holiday sale for 20% off!

    which means $55.20 shipped International, $52 USA shipped




  9. #9
    Subscriber Click here to find out how to Subscribe
    Join Date
    Dec 2015
    Location
    AYR on the WET coast of Scotland
    Posts
    811
    Quote Originally Posted by mouthfulloflake View Post
    $42 with international shipping

    $39 shipped within the USA

    also, Nushings are on holiday sale for 20% off!

    which means $55.20 shipped International, $52 USA shipped



    Hmm.. comes up not secure site ..

  10. #10
    Not a secure site?
    ah- I see the warning now from google chrome, thats a new thing apparently, looking into a bit, it seems Google wishes for me to purchase a security certificate. Since I do not process any payments on the site itself ( it just sends you to paypal) I am not certain I will bother with it.

    You can always send me a check if you do not trust paypal, its been done before.

    Just a few Fuel tank kits left

    http://nushings.com/#/moreproduct

    plenty of Nushings as always.

    http://nushings.com/#/

  11. #11
    Quote Originally Posted by West coast gser View Post
    Hmm.. comes up not secure site ..
    Just for you West Coast Gser

    https://nushings.com/#/

  12. #12
    The COvid19 pandemic has slowed down post service to the UK, what was 1-2 weeks is now 2-4 weeks.

    I am fully stocked with Nushings and fuel kits and still shipping parts out.

    Let me know if I can answer any questions!

    -Matt

    email: nushings@gmail.com

  13. #13
    Subscriber Click here to find out how to Subscribe
    Join Date
    Jun 2020
    Location
    Wirral, England
    Posts
    16
    I wish there was a U.K distributor.

    I would literally buy these now for my customer. But I can't wait for postage from the USA.

    I volunteer myself to stock and distribute these in the U.K/Europe if the manufacturer is reading this.

  14. #14
    Subscriber Click here to find out how to Subscribe
    Join Date
    Oct 2010
    Location
    Northwich Cheshire
    Posts
    497
    Quote Originally Posted by MotoRevive View Post
    I wish there was a U.K distributor.

    I would literally buy these now for my customer. But I can't wait for postage from the USA.

    I volunteer myself to stock and distribute these in the U.K/Europe if the manufacturer is reading this.
    That would be fantastic for us in the Northwest.
    The older I get, the faster I was.......... Dodgy Ticker!!!

  15. #15
    Subscriber Click here to find out how to Subscribe
    Join Date
    Apr 2003
    Location
    The corner of Miles and Gil
    Posts
    2,287
    Quote Originally Posted by MotoRevive View Post
    I wish there was a U.K distributor.

    I would literally buy these now for my customer. But I can't wait for postage from the USA.

    I volunteer myself to stock and distribute these in the U.K/Europe if the manufacturer is reading this.
    If you promise to buy me a replacement set from the US I’ll send you my spare set ��
    R1150GS | R100/7

  16. #16
    Old enough to know better Click here to find out how to Subscribe
    Join Date
    Jan 2009
    Location
    The nut behind the handlebars
    Posts
    1,315

    Click here to find out how to remove these ads

    Quote Originally Posted by MotoRevive View Post
    I wish there was a U.K distributor.

    I would literally buy these now for my customer. But I can't wait for postage from the USA.

    I volunteer myself to stock and distribute these in the U.K/Europe if the manufacturer is reading this.
    Have you emailed him at nushings@gmail.com ?

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Anyone attending a Ride Out or Event organised through the UKGSer Forums does so at their own risk.
UKGSer.com or anyone organising an event posted here will not be held responsible in any way for damage or personal injury sustained while attending any such events.

Members attending any such event do so at their own risk.

The text, images, graphics, sound files, animation files, video files, and their arrangement on this Website are all subject to copyright and other intellectual property protection. These objects may not be copied for commercial use or distribution, nor may these objects be modified or reposted to other sites without prior written permission.

Disclaimer: Use or depiction of the BMW logo or trademark throughout this web site is for illustrative and editorial purposes only, and to the benefit of the trademark owner, with no intention of infringement of the trademark.

The UKGSer Forums may include adult content for which it cannot be held responsible. Your use of this website constitutes acceptance of the UKGSER network privacy policy



UKGSer is....

"A vent, a source of info, a source of bullshit, a source of humour and in the coming months, possibly a source of sanity." Big Lad March 2020

"I have always known this community is full good people even if most of you cover it up with piss n vinegar" Chad 2018

"Its about being a grown up hooligan - and if that means a dark visor, remus open pipe and a bit of speeding out of town then all well and good" Kaister 2005