A bit of Bully

Exhaust mount flange thing.......

I've had a look at the original mount Mike and it has an inner sleeve which the exhaust locates into (ignore the perspective in the photo, they are the same size). The exhaust slides down into the gap IYSWIM

<a href="https://andressotoscastello.smugmug.com/UkGSer/n-5CFLKf/i-5DsZQ2h/A"><img src="https://photos.smugmug.com/photos/i-5DsZQ2h/0/53185aad/XL/i-5DsZQ2h-XL.jpg" alt=""></a>

<a href="https://andressotoscastello.smugmug.com/UkGSer/n-5CFLKf/i-c3NfL8h/A"><img src="https://photos.smugmug.com/photos/i-c3NfL8h/0/4c6ecc4e/XL/i-c3NfL8h-XL.jpg" alt=""></a>

<a href="https://andressotoscastello.smugmug.com/UkGSer/n-5CFLKf/i-vvcmS4d/A"><img src="https://photos.smugmug.com/photos/i-vvcmS4d/0/a558a338/XL/i-vvcmS4d-XL.jpg" alt=""></a>

Does that help :nenau

Andres
 
15 days later.....

Tap tap tap - sigh...

Tap tap tap..........
 
Normal service will be resumed once Mikeyboy has unpacked some boxes............. :D

<a href="https://andressotoscastello.smugmug.com/UkGSer/n-5CFLKf/i-SCP2bZd/A"><img src="https://photos.smugmug.com/photos/i-SCP2bZd/0/70f79b2c/XL/i-SCP2bZd-XL.jpg" alt=""></a>

Andres
 
This thread is useless!



Without lots of gratuitous two stroke engine starting, and spanked to within an inch of the exansion chambers life!

Oh and we need copious dollops of Castrol R to complete the experiance :) :thumb2
 
This thread is useless!



Without lots of gratuitous two stroke engine starting, and spanked to within an inch of the exansion chambers life!

Oh and we need copious dollops of Castrol R to complete the experiance :) :thumb2

It was running once; does the below help, not exactly spanked though admittedly...........

I have actually bought some 'modern' premix castor based oil for it purely for the smell as I'm shallow like that but, upon further investigation it seems that castor is prone to coking up/fouling the engine unless you're running WOT most of the time (ie racing) so I reckon I'll run a modern synth oil but, just like when I had my LC all those years ago, bung a tea spoon of castor oil in the tank just for the smell :D

<iframe width="560" height="315" src="https://www.youtube.com/embed/hHSFidJSZxU" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Andres
 
Will it not take the classic oil as sold by Halfords and used by many HD350/500 derivatives?

763ff074ca0d76a2b78b7616158b83a9.png
 
Will it not take the classic oil as sold by Halfords and used by many HD350/500 derivatives?

Ahem................it's a 2 stroke dim bat :D

ATF for the clutch.

Straight 80W for the box.

2 stroke pre-mix for the fuel.

I guess you could use the 20/50 to lube the cables :nenau ;)

Andres
 
Yes I thought that after rereading you comments but thought someone would enjoy berating my comments in good UKGSer fashion :D
 


Back
Top Bottom