Hi folks. Newby here - just picked up mint 96 R1100RT last week (my 1st oilhead - always had airheads) and the power screen is not working. Well it will work but only if I fidge it....
BTW what a PITA to get to those relays! Now they easilly sit behind the speaker grill for future probs....
Anyway - battled to get another 2 new realys - fitted them and still not working. So delved in with the manual and got the motor off and its working fine (2 wires) got the power in to both relays from 12v Batt+, got, got the power from handlebar switch 12v ok for both up and down, got the earths on both replays and the motor ok. However nothing happens unless - see pic - I earth the up/down switch from the relays (not the handlebar) to the up/down switch on motor. I've got a bodge (see pic) where if I bridge the 2 switched wires on relays/motor to a common earth the up/down switch on bars activates!!! What the ??? am I missing here folks - BTW - both the old relays are fine!
https://ibb.co/GTChwDK
BTW what a PITA to get to those relays! Now they easilly sit behind the speaker grill for future probs....
Anyway - battled to get another 2 new realys - fitted them and still not working. So delved in with the manual and got the motor off and its working fine (2 wires) got the power in to both relays from 12v Batt+, got, got the power from handlebar switch 12v ok for both up and down, got the earths on both replays and the motor ok. However nothing happens unless - see pic - I earth the up/down switch from the relays (not the handlebar) to the up/down switch on motor. I've got a bodge (see pic) where if I bridge the 2 switched wires on relays/motor to a common earth the up/down switch on bars activates!!! What the ??? am I missing here folks - BTW - both the old relays are fine!
https://ibb.co/GTChwDK